Add New »

Flower and Pearl Ivory Bridesmaid Jewelry Set DIY Tutorial

posted 1 year ago in Jewelry

Flower and Pearl Ivory Bridesmaid Jewelry Set DIY Tutorial : wedding bridesmaid jewelry tutorial diy handmade gift bridal set white ivory jewelry 5156197891 9cfbd5dae7

This Bridesmaid Jewelry Tutorial is perfect for the Bride who wants to do something special for her bridesmaids and now is the right timing since these flower sets are great for Spring/Summer. It is very easy to follow and you won’t need any prior jewelry making experience.

Here is the list of materials you will need for the full set of Earrings, Necklace, Ring and Bobby Pins. You might not find the Resin Flowers in a regular bead store, so I recommend that you buy them online. You can also contact me if you have trouble finding the materials. This list is if you want the whole set, but you can choose to make only part of it. To see this tutorial with pictures go HERE

 

Material:

 

-          1 Resin Chrysanthemum Flower 32mm in Ivory Color for the Ring

 

-          1 Silver Filigree Adjustable Ring with pad

 

-          2 Resin Chrysanthemum Flowers 15mm in Ivory Color for the Earrings

 

-          2 Silver Ear Studs with Pad

 

-          1 Chrysanthemum Flowers 15mm in Ivory Color for the Filigree Bobby Pin

 

-          1 Silver Bobby Pin with Filigree Pad

 

-          2 Resin Rose Flowers 10mm in Ivory Color for the Bobby Pins

 

-          2 Silver Bobby Pins with Pad

 

-          1 Resin Rose Flower 43 x 35mm in Ivory color for the Necklace

 

-          1 Silver filigree pad 15mm for the Necklace

 

-          6 Ivory Glass Pearls 8mm for the Necklace

 

-          6 Silver Eye Pins ¾ or 1 inch for the Necklace

 

-          1 Silver Spring Clasp for the Necklace

 

-          1 Silver Jump Ring 7mm for the Necklace

 

-          1 Silver Jump Ring 4mm for the Necklace

 

-          1 Silver Chain size of your choice

 

-          1 Nose Pliers

 

-          1 Square of Sand paper

 

-          1 Glue E-6000

Flower and Pearl Ivory Bridesmaid Jewelry Set DIY Tutorial : wedding bridesmaid jewelry tutorial diy handmade gift bridal set white ivory jewelry 5156804668 95af99e1fb

First we will start gluing all the flowers to their respective settings, since they have to dry at least 24 hours to be safe to handle. You might want to do this the day before or just do everything the same day and finish assembling the necklace the next day. Before you start gluing, take the sandpaper square and file the settings and the back of the flowers a little bit. That’s to leave them more even since some can have little bumps, it also allows the glue to hold better. Once you have filed them take a toothpick and get a small amount of the glue and apply on a Bobby Pin pad.

 

Take one rose flower and apply the glue as well, wait about two minutes and then press it on the Bobby pin. Make sure you have centered it correctly. You will have some minutes to move it a little around until it’s on the desired position. Then do the same with all the rest of the flowers and attach to their respective settings except for the Large Rose flower for the Necklace.

 

Now take the Large Flower for the Necklace and apply the glue on the Filigree. When you set the Rose make sure that you attach it on the upper part of the flower, so that the little ring can be seen from under the Rose. This is to attach a jump ring and then attach to the necklace.

 

Now let everything dry for at least 24 hours. When it’s dry take the 7mm Jump ring and open it, to do that push one end forward and the other in the opposite direction. Never open it by pushing it to the sides. Attach the jump ring to the large Rose Pendant. You could now close it and hang on the chain as a simple necklace, which looks very beautiful by the way. But I want to complicate it a little more.

 

Take one Glass Pearl and slide it onto an Eye pin. Next we’ll do a simple loop into the remainder of the pin. Grab the eye pin and with the other hand use the round nose pliers. Place the pliers at the top of the pin; make sure you don’t use the biggest part of the pliers, since it will make your loop too big. Now begin rolling the wire towards the beads until the end of the wire meets the other end of the loop. If you didn’t calculate right you can cut the excess of the wire end keep rolling in, or re-try doing the loop.

 

Now do the same with the remaining pearls and pins. Once you have the pearls on the eye pins attach one to the other and close the loops except for the two in the outside. Next cut the chain into equal parts and slide one chain on every side of the pearls and close the loops.

 

We’re almost finished, just a last step. Take the 4mm jump ring and open following the instructions above slide one side of the chain on it and then close it. Take the spring ring and open the attached jump ring and slide the other side of the chain on it and then close. Don't forget to finally add the large Rose Pendant in the middle of the Pearls. Now your Necklace is ready! Doesn’t it look beautiful?

Flower and Pearl Ivory Bridesmaid Jewelry Set DIY Tutorial : wedding bridesmaid jewelry tutorial diy handmade gift bridal set white ivory jewelry 5156808636 8b9a5f22c4 Z

You have finished a complete set for your bridesmaids. You can choose to just make the Necklace and Ring, or the Bobby Pins and Necklace or any combination you want, or make the complete set. Your bridesmaids will be impressed with your skills. Find the whole Tutorial on my Blog.

posted by EstyloJewelry 1 year ago

This looks great, Thank you!

posted by Lips 1 year ago

I'm glad you liked it. Let me know if you have any questions :)

posted by EstyloJewelry 1 year ago

Reply

You must log in to post.





Visit our sister sites eHarmony
Online Dating		 eHarmony Advice
Dating Advice		 Project Wedding
Wedding Songs		 JustMommies
Pregnancy Calendar
Copyright 2004-2012, Weddingbee.com
 
More