Miss Cola's Template for “Old School” Disposable Table Camera Sleeves

Since so, so many people asked me for the template to my “Old School” Disposable Table Camera Sleeves (original post here), I've decided to share!

Keep in mind that this will only fit the camera I used, if you have different cameras, just follow along the tutorial from the link above to create your own template. I used Fujifilm QuickSnap 400 Speed Single Use Camera with Flash, like these.

I've uploaded both sides of the template here in the DIY section of Weddingbee for you to download (Illustrator CS files). One is the outside of the sleeve, where you will place your graphics, then delete the red outline of the sleeve and run it through your printer (make sure you don't reduce to fit printer margins when printing). The other file is the inside of the sleeve, just flip your paper over after printing your graphics on it, and print out the red outline of the sleeve on the backside. You can then use it as a guide to cut out the sleeve, and the red outline will not be visible from the outside.

Have fun designing your own custom table camera sleeves!

I can't get these to open...